Bull Bars & Frontal Protection

An ARB bull bar will provide a 4WD with a massive amount of frontal protection. For those who regularly spend time in remote and rural areas, the impending risk of animal strike makes a steel bar the most obvious choice when selecting vehicle accessories. ARB’s bars are superbly engineered and manufactured not only to maintain maximum functionality, but also to ensure they complement the look of the vehicle.

ARB manufactures a number of different bars from the sleek deluxe and Sahara styles, to the more functional commercial bar, as well as nudge bars for smaller SUVs and utes.

Our full range of bull bars are:

Deluxe Bullbars

Commercial Bullbars

Side Rails & Protection Steps

Rear Protection Equipment

Rear Bars With Wheel Carriers

Rear Step Tow Bars


Deluxe Bullbars

bullbar

Our deluxe bull bar selection is our most extensive, with bull bar and winch bar options available for most vehicle models.

Loaded with features aimed at making remote area travel safer, no other bull bar offers the same degree of vehicle integration, protection or functionality.

wingbull

1 Wing design

Five fold upswept and tapered wing design for optimum strength and approach angle.

recessedind

2 Recessed indicators

Recessed indicators for protection against road debris that could damage them.

steelup

3 Steel uprights

Steel uprights support outer frame and are finished with cover straps to ensure there are no exposed sharp edges.

4cb

4 CB aerial brackets

Most ARB bull bars include two CB aerial brackets welded behind the top cross tube.

drivinglight

5 Driving light provision

Secure mounting points ideal for IPF driving lights.

mounting_system

6 Mounting system

Mounting system specifically engineered for each vehicle to ensure it functions properly in extreme circumstances.

hiliftjack

7 Hi-Lift jacking points

Some designs feature Hi-Lift jacking points, allowing a Hi-Lift jack to be mounted directly on the bar.

winchcompat

8 Winch compatibility

The properly supported structure of winch bull bars is designed to accommodate the stresses of winching.

splitpan

9 Split

Split pan design provides increased strength and airflow to the engine.
Please note: certain models may not incorporate all of the specific features.

Commercial Bull Bars

bullbar2
ARB’s range of commercial bull bars was introduced to appeal to customers who needed the structural integrity associated with ARB protection equipment, but were willing to go without some of the cosmetic features that finish our products so neatly.

comwing

1 Wing design

Five fold upswept and tapered wing design for optimum strength and approach angle.

comsplitpan

2 Split pan design

Split pan design provides increased strength and airflow to the engine.

comsteeltube

3 Steel tube

76.1mm steel centre frame tube and 47.6mm outer frame tube for added strength.

comsecuremount

4 Secure mounting

High tensile bolts securely fasten the mounting system to the chassis.

comdrivinglight

5 Driving light provision

Secure mounting points ideal for IPF driving lights.

comrecessedindicators

6 Recessed indicators

Recessed indicators for protection against road debris.

comelecwin

7 Electric winch provision

Some commercial bars are available with electric winch provision, and have been specifically designed to accommodate the stresses of winching.

comcbarial

8 CB aerial brackets

Some ARB commercial bars incorporate CB aerial brackets welded behind the top cross tube.

comhilift_copy

9 Hi-Lift jacking points

Some commercial bars feature Hi-Lift jacking points, allowing a Hi-Lift jack to be mounted directly on the bar.


Side Rails & Protection Steps

ARB side protection equipment acts as a shield between your vehicle’s vulnerable lower panels, and rocks or road debris encountered in remote area travel.

siderail

Side Rails & Steps

A complete ARB side rail and integrated step system provides the ultimate protection for off road driving, as well as allowing for easier access to the vehicle through the fitting of tread plate steps featured on most models.

protstep

Protection Steps

Our protection steps are mounted to the vehicle’s chassis to ensure overall strength, providing a strong barrier between your vehicle and obstacles encountered in off road travel.

delpro

Deluxe Protection Steps

ARB deluxe protection steps utilise innovative, modern styling, and feature extruded alloy steel step sections that incorporate non-slip, moulded urethane step pads.

rocksli

Rock Sliders

Our rock sliders are manufactured from tough, tubular steel, making them ideal for use in steep, rocky terrain.

 

Rear Protection Equipment

There is no better way to protect the back of your vehicle than with ARB’s range of rear protection equipment. Manufactured to extremely high standards for maximum strength and designed specifically to suit each vehicle for the optimum fit, our protection equipment selection includes a variety of different models. Rear step tow bars are available for utes, along with rear bars (some of which incorporate wheel carriers), to cater for the diverse needs of 4WDers. All types integrate a heavy duty towing system for maximum functionality, but also incorporate individual features that differ for specific models.

Photography by Offroad Images 2007 - http://www.offroadimages.com.au - (02) 9543 0088

Rear Bars With Wheel Carriers

ARB’s range of rear bars, incorporating wheel carriers and jerry can holders, provides additional functionality while delivering high quality vehicle protection.

4WDs with the spare tyre mounted on the back door may suffer from unnecessary door assembly stress, while a spare wheel located underneath a vehicle can be difficult to access, more prone to damage and may affect ground clearance when driving off road. Both of these mounting methods can also prove unsuitable if a larger tyre size is sought. An ARB rear bar addresses all of these issues, relocating the spare tyre onto the bumper assembly via a swing out carrier.

rearwheel
carrieropp

Carrier operation

The carriers operate on gas struts that are sufficient to hold each side open in most situations. However if the vehicle is on an extreme side angle, the locking pin can be engaged to ensure each side remains open.

easy

Easy to operate

The wheel carrier and jerry can holder is easy to operate, and can be opened by pulling a lever. To close, you simply shut it as you would a car door.

quick

Quick, convenient access

The ARB rear bar system ensures quick, convenient access to the rear of your vehicle.

Rear Step Tow Bars

ARB’s rear step tow bars for utility vehicles provide a massive amount of protection for vulnerable rear panels.

  • Integrated heavy duty towing system – meet or exceed ADR requirements
  • Incorporates towing eyes and a tread plate step
  • Removable hitch for optimum departure angles when off road
  • Manufactured from steel with a vehicle specific mounting system
  • Finished in a durable powder coat with the option to colour code
rearsteptow